How to Service and Repair a Differential Pressure Feedback EGR Valve on 2000 Ford Crown Victoria?

To clean Differential Pressure Feedback EGR Valve, begin with the removal of the appearance cover. Unscrew the clamp and loosen the engine air cleaner tube. De-connect engine control sensor wiring and take off two hoses. Then remove the two nuts to which the valve is attached. To install it, just follow the opposite procedure that was followed during the uninstallation.

OEM 2000 Ford Crown Victoria EGR Valve

Emissions EGR Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 EGR Valve found

View related parts
2000 Ford Crown Victoria EGR Valve Part Number: XL3Z-9D475-BA
$58.62 MSRP: $93.09
You Save: $34.47 (38%)
Product Specifications
- Other Name: Valve - Exhaust Gas Recirculation; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid; EGR
- Replaces: F6AZ-9D475-BA, XF2Z-9D475-EA, XR3Z-9D475-CA, F65Z-9D475-A, XR3Z-9D475-DA
- Base No.: 9D475
- Item Weight: 1.40 Pounds
- Item Dimensions: 4.2 x 3.4 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-9D475-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Crown Victoria Submodels:
- Base, LWB, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS

2000 Ford Crown Victoria EGR Valve

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Crown Victoria EGR Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Crown Victoria EGR Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Crown Victoria EGR Valve Parts Q&A

Q: How to Service and Repair a Differential Pressure Feedback EGR Valve on 2000 Ford Crown Victoria?
A: To clean Differential Pressure Feedback EGR Valve, begin with the removal of the appearance cover. Unscrew the clamp and loosen the engine air cleaner tube. De-connect engine control sensor wiring and take off two hoses. Then remove the two nuts to which the valve is attached. To install it, just follow the opposite procedure that was followed during the uninstallation.