How to Service and Repair an Antenna Cable for Front on 2000 Lincoln Town Car?

You must start the antenna cable service by detaching the radio unit first. The first step includes removing the cowl trim panel before putting the right-hand lower instrument panel cover aside with its pushpins removed. The service technician disconnects the light and power point connector from the right-hand lower instrument panel cover and can then remove the cover. The radio antenna lead-in cable requires disconnection before removing it with the removal of five cable clips. The installation process should be performed as the opposite of removal steps.

OEM 2000 Lincoln Town Car Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Antenna Cable found

View related parts
2000 Lincoln Town Car Cable
Part Number: YW1Z-18812-AA
Product Specifications
- Other Name: Cable Assembly - Extension
- Manufacturer Note: Cable asy , radio to IP
- Base No.: 18812
- Item Weight: 8.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YW1Z-18812-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln Town Car Submodels:
- Cartier, Cartier L, Executive, Executive L, Signature | 8 Cyl 4.6 L GAS

2000 Lincoln Town Car Antenna Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Lincoln Town Car Antenna Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Lincoln Town Car Antenna Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Lincoln Town Car Antenna Cable Parts Questions & Experts Answers

Q: How to Service and Repair an Antenna Cable for Front on 2000 Lincoln Town Car?
A: You must start the antenna cable service by detaching the radio unit first. The first step includes removing the cowl trim panel before putting the right-hand lower instrument panel cover aside with its pushpins removed. The service technician disconnects the light and power point connector from the right-hand lower instrument panel cover and can then remove the cover. The radio antenna lead-in cable requires disconnection before removing it with the removal of five cable clips. The installation process should be performed as the opposite of removal steps.