How to service the front ABS sensor on 2003 Lincoln Aviator?

Service of the front ABS sensor begins with disconnecting the battery ground cable then removing the combination of front wheel and tire assembly. The components should be removed following their specified removal procedures. Use mechanic's wire to secure front disc brake components instead of hanging them from the brake hose while performing brake component removal. The first step before removing the front disc brake component should be marking it exactly where it meets the front wheel hub flange. Owners should reach the harness connector only after lowering their vehicle down and accessing it through the engine compartment near the fender apron. A hoist should raise the vehicle so you can take out the harness retainers. The sensor ring exists as an integral component of the front wheel hub and bearing assembly so it cannot receive any service. Follow the opposite sequence of steps used during removal to set up the components properly.

OEM 2003 Lincoln Aviator ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Sensors found

View related parts
2003 Lincoln Aviator ABS Sensor, Front Driver Side Part Number: 4L2Z-2C204-C
$72.02 MSRP: $120.91
You Save: $48.89 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; ABS Wheel Speed Sensor; ABS Speed Sensor; Speed Sensor; Front Speed Sensor
- Position: Front Driver Side
- Replaces: 3L2Z-2C204-AA, BRAB-12, 1L2Z-2C204-AC, BRAB-469, 3C5Z-2C204-AA, 4L2Z-2C204-B, BRAB-405, 4L2Z-2C204-A
- Item Weight: 1.20 Pounds
- Item Dimensions: 15.5 x 10.9 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L2Z-2C204-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Lincoln Aviator Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2003 Lincoln Aviator ABS Sensor, Rear Passenger Side Part Number: 2L2Z-2C190-AC
$96.47 MSRP: $131.28
You Save: $34.81 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Left, Rear Right; ABS Wheel Speed Sensor; Speed Sensor; Rear Speed Sensor
- Position: Rear Passenger Side
- Base No.: 2C190
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.9 x 3.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L2Z-2C190-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Lincoln Aviator Submodels:
- Base | 8 Cyl 4.6 L GAS

2003 Lincoln Aviator ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Lincoln Aviator ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Lincoln Aviator ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Lincoln Aviator ABS Sensor Parts Q&A

Q: How to service the front ABS sensor on 2003 Lincoln Aviator?
A: Service of the front ABS sensor begins with disconnecting the battery ground cable then removing the combination of front wheel and tire assembly. The components should be removed following their specified removal procedures. Use mechanic's wire to secure front disc brake components instead of hanging them from the brake hose while performing brake component removal. The first step before removing the front disc brake component should be marking it exactly where it meets the front wheel hub flange. Owners should reach the harness connector only after lowering their vehicle down and accessing it through the engine compartment near the fender apron. A hoist should raise the vehicle so you can take out the harness retainers. The sensor ring exists as an integral component of the front wheel hub and bearing assembly so it cannot receive any service. Follow the opposite sequence of steps used during removal to set up the components properly.