OEM 2003 Lincoln Town Car Parking Brake Shoe

2003 Lincoln Town Car Parking Brake Shoe Parts Questions & Experts Answers

• Q: How to service and repair the parking brake shoes on 2003 Lincoln Town Car?

  A: The service and repair of parking brake shoes must begin with disabling electrical power to the air suspension system using the air suspension switch located in the luggage compartment. This step prevents unexpected air spring changes while working. Start the procedure by taking out the rear brake disc to enhance visibility. Detach the brake shoe return spring and the adjusting spring from the adjuster by using a scratch awl as a sharp-pointed tool for assistance. Pull out the parking brake actuator after pushing the braking shoes together and separate the end of the parking brake cable. Start by removing brake shoe hold-down springs then continue with the parking brake shoe along with its linings removal. A thorough examination must be conducted to detect any signs of excessive wear or damage in the components followed by necessary replacements. A correct installation starts with reversing the removal steps and lubricating the brake shoe contact point with anti-seize before placing the rear brake shoes. You should apply anti-seize lubricant to threads of the adjusting screw. A proper brake adjusting gauge allows you to set the rear brake shoe and lining diameter at 0.5 mm (0.020 inch) less than the drum portion of the brake disc's inner size. You should then adjust the parking brake cable tension before checking for correct parking brake operation.