How to Service and Repair Air Ducts on 2004 Lincoln Aviator?

Refer to the illustration with its corresponding table for the removal sequence when servicing and repairing the air distribution ducts. Each separate part should follow its dedicated instructions shown in the steps order. First remove the front floor console and next dismantle the instrument panel. Secondly you should take out both the heater core and evaporator core housing. The installation process should reverse the steps used for removal of components.

OEM 2004 Lincoln Aviator Air Duct

Air Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Air Duct found

View related parts
2004 Lincoln Aviator Outlet Tube
Part Number: 1L2Z-9B659-AC
Product Specifications
- Other Name: Hose - Air; Engine Air Intake Hose
- Base No.: 9B659
- Item Weight: 5.10 Pounds
- Item Dimensions: 5.1 x 5.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-9B659-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Lincoln Aviator Submodels:
- Base | 8 Cyl 4.6 L GAS

2004 Lincoln Aviator Air Duct

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Lincoln Aviator Air Duct available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Lincoln Aviator Air Duct as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Lincoln Aviator Air Duct Parts Questions & Experts Answers

Q: How to Service and Repair Air Ducts on 2004 Lincoln Aviator?
A: Refer to the illustration with its corresponding table for the removal sequence when servicing and repairing the air distribution ducts. Each separate part should follow its dedicated instructions shown in the steps order. First remove the front floor console and next dismantle the instrument panel. Secondly you should take out both the heater core and evaporator core housing. The installation process should reverse the steps used for removal of components.