Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2004 Lincoln Aviator Submodels:
Base | 8 Cyl 4.6 L GAS
2004 Lincoln Aviator Seat Belt
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Lincoln Aviator Seat Belt available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Lincoln Aviator Seat Belt as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2004 Lincoln Aviator Seat Belt Parts Questions & Experts Answers
Q: What Seat Belt Safety Precautions Should Be Taken When Servicing a Scrapped Pretensioner on 2004 Lincoln Aviator?
A: Safety glasses must be worn during pretensioner service operations on scrapped vehicles since this safety feature has pyrotechnic properties. The remote deployment process must take place outside where staff should stand at least 6.1 meters (20 feet) outside safe distances while wearing hearing protection because of the demanding deployment sound. The safety belt buckle pretensioner and safety belt retractor pretensioner must be kept from contact with any fixed surfaces because this implements risk of injury through object reflection. Start by depowering the system and take out the safety belt buckle pretensioner assembly from the vehicle. The electrical connector from main seat wire harness should be cut off and removed next to a four-inch section for safety belt buckle pretensioners that lack hard-wired connections. The electrical connector should be installed on the safety belt buckle pretensioner before wire stripping takes place at the connector area. You should use two wires of at least 20 gauge along with 6.1 meters length to connect their ends with the safety belt buckle pretensioner wires. Position the assembly flat with at least 6.1 meters free space between it and the floor while also avoiding contact of moveable parts with the surface. A 12-volt battery will activate the safety belt buckle pretensioner through its wire connections. Allow the pretensioner to cool down for at least ten minutes and then approach it before proper disposal through standard scrapping methods.