FordParts
My Garage
My Account
Cart
OEM 2005 Lincoln Aviator Drive Shaft
Axle Shaft- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Drive Shafts found
2005 Lincoln Aviator Drive Shaft, Front Part Number: 1L2Z-4A376-AA
Product Specifications- Other Name: Shaft Assembly - Drive; Drive Shaft, Front; Driveshaft; Drive Shaft Assembly
- Position: Front
- Replaces: 1L2Z-4A376-AB
- Base No.: 4A376
- Item Weight: 12.80 Pounds
- Item Dimensions: 4.9 x 4.9 x 34.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-4A376-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Aviator Drive Shaft Part Number: 6L2Z-4602-A
Product Specifications- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 4L2Z-4602-A, 4C5Z-4602-BA
- Base No.: 4602
- Item Weight: 29.40 Pounds
- Item Dimensions: 6.4 x 6.2 x 57.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-4602-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Aviator Drive Shaft, Rear Part Number: 4C5Z-4602-AA
Product Specifications- Other Name: Shaft Assembly - Drive; Driveshaft
- Position: Rear
- Base No.: 4602
- Item Weight: 35.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C5Z-4602-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Aviator Drive Shaft
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln Aviator Drive Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln Aviator Drive Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Lincoln Aviator Drive Shaft Parts Q&A
- Q: How to Service the Rear Drive Shaft of a 4x2 on 2005 Lincoln Aviator?A: A 4x2 vehicle maintenance requires locating it on a hoisting system with neutral selected. Marks on the extension housing and driveshaft need to match before separation and you should place an index mark onto the transmission output shaft to match the extension housing mark when removing them. The balance of the system can be maintained by marking the driveshaft flange alignment with the pinion flange. The procedure requires discarding the four driveshaft flange bolts followed by new bolt installation requiring a torque of 112 Nm (83 ft. lbs.). A proper tool should be used for gently prying operations at the designated area to take apart the driveshaft flange yoke from the pinion flange because of their tight connection. The driveshaft flange must be evenly tightened onto the pinion flange through cross-bolt pattern application. The original driveshaft flange bolts should get treatment with Threadlock and Sealer TA-25 when new bolts are not accessible because this product satisfies Ford specification WSK-M2G351-A5. Cover the exposed threads of bolts in Threadlock and Sealer TA-25 before reversing the removal process for installation.
Related 2005 Lincoln Aviator Parts
2005 Lincoln Aviator CV Joint
2005 Lincoln Aviator Differential
2005 Lincoln Aviator Differential Bearing
2005 Lincoln Aviator Differential Pinion Bearing
2005 Lincoln Aviator Differential Seal
2005 Lincoln Aviator Driveshaft Yokes
2005 Lincoln Aviator Pinion Bearing
2005 Lincoln Aviator Pinion Washer
2005 Lincoln Aviator Slip Yoke
2005 Lincoln Aviator Transfer Case Shim
2005 Lincoln Aviator Universal Joint
2005 Lincoln Aviator Wheel Seal