How to service and repair the hood latch on 2005 Lincoln Aviator?

Service and repair of the hood latch starts by uninstalling the upper radiator sight shield along with the three hood latch bolts before tightening them to 12 Nm (9 lb-ft) when reinstalling. The service and repair of the hood latch begins by removing the secondary hood latch striker with a check for correct alignment when a new striker is added. After disconnecting the hood release cable you must take out the hood latch while inspecting new latch alignment. An application of lubricant on the hood latch will help achieve smooth functioning after installation. Perform reinstallation through the process of reversing the removal steps.

OEM 2005 Lincoln Aviator Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Latch found

View related parts
2005 Lincoln Aviator Lock Part Number: 4C5Z-16700-AA
Product Specifications
- Other Name: Latch Assembly - Hood; Hood Latch; Latch
- Replaces: 2C5Z-16700-AA
- Base No.: 16700B
- Item Weight: 1.60 Pounds
- Item Dimensions: 11.9 x 7.6 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C5Z-16700-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Lincoln Aviator Submodels:
- Base | 8 Cyl 4.6 L GAS

2005 Lincoln Aviator Hood Latch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln Aviator Hood Latch available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln Aviator Hood Latch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Lincoln Aviator Hood Latch Parts Q&A

Q: How to service and repair the hood latch on 2005 Lincoln Aviator?
A: Service and repair of the hood latch starts by uninstalling the upper radiator sight shield along with the three hood latch bolts before tightening them to 12 Nm (9 lb-ft) when reinstalling. The service and repair of the hood latch begins by removing the secondary hood latch striker with a check for correct alignment when a new striker is added. After disconnecting the hood release cable you must take out the hood latch while inspecting new latch alignment. An application of lubricant on the hood latch will help achieve smooth functioning after installation. Perform reinstallation through the process of reversing the removal steps.