OEM 2005 Lincoln Aviator Washer Reservoir

2005 Lincoln Aviator Washer Reservoir Parts Questions & Experts Answers

• Q: How to service the windshield washer reservoir and pump on 2005 Lincoln Aviator?

  A: The windshield washer service requires mounting the vehicle on a hoist while keeping it in NEUTRAL position. Installation of only the washer pump requires skipping the upcoming steps related to service. The air cleaner assembly and right front tire along with wheel and right front splash shield need to be removed after unsticking screws and pin-type retainers. Remove the windshield washer hoses from the washer pump while draining washer solvent into an appropriate waste storage. The second step requires working on the washer pump electrical connector as well as the reservoir sensor electrical connector. The three reservoir bolts must be taken out and they need to be tightened to 5 Nm (44 lb-in) when installing these components. You must then take out the windshield washer pump together with its reservoir. Service of the windshield washer pump requires drain of all washer solvent from connected pump hoses. The electrical connection of the windshield washer pump motor requires disconnection while handling the rubber grommet carefully for new pump installation. Operating the pump before filling the reservoir will cause premature pump failure. It is essential to prevent this occurrence. Deinstallation of the windshield washer pump and reservoir must be followed by reverse installation and sealing when finished.