FordParts
My Garage
My Account
Cart
OEM 2006 Lincoln Zephyr ABS Control Module
Anti Lock Brake Control Module- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 ABS Control Modules found
2006 Lincoln Zephyr Motor & Pump Part Number: 6E5Z-2C215-AA
$168.48 MSRP: $240.00You Save: $71.52 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Module; ABS Pump And Motor Assembly; ABS Control Module; Actuator
- Base No.: 2C215
- Item Weight: 10.30 Pounds
- Item Dimensions: 8.8 x 8.8 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-2C215-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Zephyr Control Module Part Number: 6E5Z-2C219-AA
$102.45 MSRP: $145.54You Save: $43.09 (30%)Product Specifications- Other Name: Control; ABS Control Module
- Replaces: 7E5Z-2C219-B
- Base No.: 2C219
- Item Weight: 1.80 Pounds
- Item Dimensions: 8.1 x 5.9 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-2C219-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Zephyr ABS Control Module
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Zephyr ABS Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Zephyr ABS Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Lincoln Zephyr ABS Control Module Parts Q&A
- Q: What are the important handling and installation procedures for the ABS Control Module on 2006 Lincoln Zephyr?A: Due to sensitive electrical charge reactions the Anti-Lock Brake System (ABS) Module within the Electronic Brake Control Module demands precise treatment to protect it from damage. The ABS module mating side needs protection from both brake fluid and foreign materials to stop solenoid damage. To install a new ABS control module the technician needs to use vehicle data for the system configuration and subsequent calibration operations. Start the procedure by unfastening the battery ground cable. Next, remove the degas bottle. Disconnect the ABS module electric connector followed by removing three screws which secure the ABS module. First check the ABS module terminals for all signs of damage after tightening its screws to 2 Nm (18 inch lbs.) and reverse the removal process for installation.