How to Service the Crankshaft Position Sensor on 2007 Lincoln Town Car?

The service of crankshaft position (CKP) sensor requires the vehicle to be set to neutral gear and positioned on a hoist. You should begin service by disconnecting the ground cable of the battery before removing the A/C compressor drive belt from its pulley. Disconnection of two electrical connectors occurs first for the A/C compressor field coil and the CKP sensor. The first step involves untightening the nut while also removing the wiring harness clips. The three A/C compressor bolts need only to be loosened until the compressor drops down one inch for accessing the CKP sensor. You should disconnect the bolt holding the CKP sensor in position. The installation process should begin by following the exact opposite order of removal steps while tightening the CKP sensor bolt to 10 Nm (89 lb-in) and the A/C compressor bolts to 25 Nm (18 lb-ft) and the wiring harness clips to 9 Nm (80 lb-in).

OEM 2007 Lincoln Town Car Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2007 Lincoln Town Car Crankshaft Position Sensor
Part Number: 1W7Z-6C315-AB
$41.11 MSRP: $65.27
You Save: $24.16 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Position Sensor; Sensor - Crankshaft Position - Cps
- Manufacturer Note: Sensor asy. (Crankshaft position) #1W7E 6C315-AA
- Replaces: 1W7Z-6C315-AA
- Base No.: 6C315
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.1 x 6.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W7Z-6C315-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Lincoln Town Car Submodels:
- Anniversary, Base, Cartier, Cartier L, Cypress, Designer Series, Executive, Executive L, Executive Protection Series, Jack Nicklaus, Protection Series, Signature, Signature L, Signature Limited, Touring Edition, Tournament Edition, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2007 Lincoln Town Car Crankshaft Position Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln Town Car Crankshaft Position Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln Town Car Crankshaft Position Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Lincoln Town Car Crankshaft Position Sensor Parts Questions & Experts Answers

Q: How to Service the Crankshaft Position Sensor on 2007 Lincoln Town Car?
A: The service of crankshaft position (CKP) sensor requires the vehicle to be set to neutral gear and positioned on a hoist. You should begin service by disconnecting the ground cable of the battery before removing the A/C compressor drive belt from its pulley. Disconnection of two electrical connectors occurs first for the A/C compressor field coil and the CKP sensor. The first step involves untightening the nut while also removing the wiring harness clips. The three A/C compressor bolts need only to be loosened until the compressor drops down one inch for accessing the CKP sensor. You should disconnect the bolt holding the CKP sensor in position. The installation process should begin by following the exact opposite order of removal steps while tightening the CKP sensor bolt to 10 Nm (89 lb-in) and the A/C compressor bolts to 25 Nm (18 lb-ft) and the wiring harness clips to 9 Nm (80 lb-in).