FordParts
My Garage
My Account
Cart
OEM 2008 Ford Crown Victoria TPMS Sensor
Tire Pressure Monitoring System Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 TPMS Sensors found
2008 Ford Crown Victoria Tire Pressure Sensor Part Number: 6F2Z-1A193-D
$20.60 MSRP: $32.71You Save: $12.11 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Kit - Sensor Attachment; Tire Pressure Monitoring System (TPMS) Sensor Mounting Band; Service Kit; TPMS Sensor Strap; Pressure Sensor Strap; Strap; Sensor
- Manufacturer Note: 17" Wheels
- Base No.: 1A193
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.7 x 7.7 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-1A193-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Crown Victoria Tire Pressure Sensor Part Number: 6F2Z-1A193-C
$20.60 MSRP: $32.71You Save: $12.11 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Kit - Sensor Attachment; Tire Pressure Monitoring System (TPMS) Sensor Mounting Band; Service Kit; Installation Kit; TPMS Sensor Strap; Strap; Sensor
- Base No.: 1A193
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 7.6 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-1A193-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Crown Victoria TPMS Sensor Part Number: 6F2Z-1A189-A
$50.82 MSRP: $83.62You Save: $32.80 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Sensor Assembly - Tire Pressure Monitor; Tire Pressure Monitoring System (TPMS) Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor; Tire Sensor; Pressure Sensor; Sensor Assembly - Tyre Pressure Monitor
- Base No.: 1A189
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.1 x 4.0 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-1A189-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Crown Victoria TPMS Sensor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Crown Victoria TPMS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Crown Victoria TPMS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Crown Victoria TPMS Sensor Parts Q&A
- Q: What Should You Know About TPMS Sensor Installation and Disposal on 2008 Ford Crown Victoria?A: A Lithium-ion battery used in Tire Pressure Monitoring System (TPMS) sensors can release dangerous substances during extreme mechanical damage to sensors; thus it is essential to immediately flush any affected skin or eyes with water for 15 minutes and seek medical help for both eye exposure and swallowing of the sensor. Proper hazardous material disposal procedures need to be followed during TPMS sensor disposal to prevent severe personal injury. New sensors must possess the identical color as removed sensors because sensors of different colors cannot work together. The sensor installation process requires neither removing the strap nor the cradle. Wheels require the tire to be detached first before proceeding with minimal force using a pocket screwdriver for the sensor locking clip and wheel removal. The sensor locking clip can be taken off using a pocket screwdriver until the cradle releases the sensor for complete removal. During assembly fully position the sensor in the cradle until it clicks into place before inserting the hinge end into the hook end while gently pushing the opposite end down. Special attention must be paid to sensor locking clip orientation during its insertion into the device because the clip can fit correctly only when positioned properly. It is essential to remember that the new tire pressure sensor requires activation through tire inflation to recommended pressure after mounting since it is shipped in battery saver mode. Beginning the sensor training procedure should happen after a 2-minute wait.