FordParts
My Garage
My Account
Cart
OEM 2009 Lincoln Town Car Fuel Pump
Gas Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Fuel Pumps found
2009 Lincoln Town Car Fuel Pump Part Number: AW1Z-9H307-C
$291.70 MSRP: $467.27You Save: $175.57 (38%)Product Specifications- Other Name: Sender And Pump Assembly; Fuel Pump and Sender Assembly; Fuel Pump Hanger Assembly; Fuel Pump Hanger; Fuel Pump Assembly
- Replaces: 6W1Z-9H307-C, AW1Z-9H307-B, PFS-576, 6W1Z-9H307-A, PFS-348, PFS-504
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AW1Z-9H307-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Lincoln Town Car Fuel Pump Part Number: 6W1Z-9H307-G
$298.51 MSRP: $478.18You Save: $179.67 (38%)Product Specifications- Other Name: Sender And Pump Assembly; Fuel Pump and Sender Assembly; Fuel Pump Hanger Assembly; Fuel Pump Hanger; Fuel Pump Assembly
- Replaces: 6W1Z-9H307-B, 5W1Z-9H307-AC, PFS-571, PFS-354, 6W1Z-9H307-D
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-9H307-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Lincoln Town Car Fuel Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln Town Car Fuel Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln Town Car Fuel Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Lincoln Town Car Fuel Pump Parts Q&A
- Q: What safety precautions should be observed when servicing the fuel gauge sender and fuel pump module on 2009 Lincoln Town Car?A: Service of both the fuel gauge sender and fuel pump module needs strict safety precautions due to the dangerous flammable fuel mixtures inside these components. Before unpacking fuel tubes or components always verify fuel system pressure release and stay away from personal electronic devices and smoking since they might cause unwanted fuel spray. Cable grounding of the battery must always happen before performing maintenance on the evaporative emission system or any fuel-related components. Start by separating the fuel tank followed by unharnessing the fuel pump module from the pressure sensor before releasing its two harness retainers. You should perform a cleaning process on both the fuel pump module mounting flange as well as its surrounding region to eliminate all foreign matter and dirt. Treatment of the fuel pump module should be gentle because it affects the float arm and filter mechanism and after that you must remove all six securing bolts. After module extraction personnel should dispose of the previous fuel pump module seal followed by a thorough inspection of the seal contact surfaces and the flange for damage. It is essential to avoid adjusting these areas as well as any polishing attempts. The fuel pump module requires replacement alongside the fuel tank in case of damage. Replace the fuel pump module seal and follow the reverse steps for reinstallation by tightening bolts to 10 Nm (89 lb-in).