How to Service and Repair the PCV Valve Hose on 2009 Lincoln Town Car?

To service and repair crankcase ventilation tubes: To access the tube on the left side, loosen quick-connects at the Air Cleaner (ACL) outlet pipe and valve cover fitting, and loosen. In the case of the right-hand tube, remove quick-connects at PCV valve and Throttle Body (TB) spacer and then disconnect. Install the 2 tubes as follows but in reverse.

OEM 2009 Lincoln Town Car PCV Valve Hose

Positive Crankcase Ventilation Valve Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 PCV Valve Hose found

View related parts
2009 Lincoln Town Car PCV Hose Part Number: 3W7Z-6853-A
Product Specifications
- Other Name: Hose - Vent; PCV Valve Hose; Crankcase Breather Hose; Vent Hose
- Replaces: 3W7Z-6853-AA
- Base No.: 6853
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.2 x 20.0 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W7Z-6853-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2009 Lincoln Town Car PCV Valve Hose

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln Town Car PCV Valve Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln Town Car PCV Valve Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Lincoln Town Car PCV Valve Hose Parts Q&A

Q: How to Service and Repair the PCV Valve Hose on 2009 Lincoln Town Car?
A: To service and repair crankcase ventilation tubes: To access the tube on the left side, loosen quick-connects at the Air Cleaner (ACL) outlet pipe and valve cover fitting, and loosen. In the case of the right-hand tube, remove quick-connects at PCV valve and Throttle Body (TB) spacer and then disconnect. Install the 2 tubes as follows but in reverse.