How should one service the fuel filler hose safely and effectively on Lincoln Aviator?

Avoid smoking and open flames near the fuel components because the system houses flammable mixtures when servicing the fuel filler hose. The fuel system pressure needs to be relieved before removing any fuel lines or components because it helps to stop accidental fuel spraying. Users should start the process by placing the vehicle on HOIST equipment in NEUTRAL and disconnecting the battery ground cable. When putting back the fuel filler pipe attach its screws tightly to 2 Nm (18 lb-in) torque. The two bolts securing the fuel filler pipe need to be removed from their frame position until you reach torque specifications of 20 Nm (15 lb-ft) for installation. You should disconnect the fuel filler pipe from the fuel tank hose as well as the vapor tube from the dust separator and the rear axle vent hose. Early build vehicle owners need to access the fuel vapor tube through their right-hand rear wheel well and detach it from the fuel vapor tee followed by unclipping the hose retainer from the fuel tank shield. Users can disconnect the fuel vapor vent tube from the inner fenderwell by depressing both tabs on the cable inside the fuel filler door compartment of late build vehicles. For the installation process reverse the steps of removal by reinstalling the fuel filler pipe before completing the procedure.

OEM Lincoln Aviator Fuel Filler Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fuel Filler Hoses found

View related parts
Lincoln Aviator Filler Tube
Part Number: 8U5Z-17B068-B
$6.11 MSRP: $8.67
You Save: $2.56 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Funnel; Fuel Filler Neck Adapter; Fuel Filler Neck Sleeve; Filler Neck Sleeve; Fuel Filler Hose; Fuel Tank Filler; Filler Pipe Tube; Tube; Filler
- Manufacturer Note: Attached To Underneath 42624 In Luggage Compartment
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Lincoln Aviator | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Lincoln Aviator Filler Hose, Lower
Part Number: L1MZ-9047-A
$54.98 MSRP: $78.65
You Save: $23.67 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Filler Pipe; Fuel Filler Hose, Lower; Fuel Filler Neck, Lower; Fuel Filler Hose
- Position: Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Lincoln Aviator | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Lincoln Aviator Filler Neck
Part Number: L1MZ-9034-D
$308.38 MSRP: $452.83
You Save: $144.45 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Fuel Filler; Fuel Tank Filler Neck; Filler Pipe
- Replaced by: L1MZ-9034-AN
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2021 Lincoln Aviator | Black Label Grand Touring, Grand Touring | 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Lincoln Aviator Filler Neck
Part Number: L1MZ-9034-AN
$308.38 MSRP: $452.83
You Save: $144.45 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Fuel Filler; Filler Pipe
- Replaces: L1MZ-9034-AC, L1MZ-9034-P, L1MZ-9034-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Lincoln Aviator | Black Label Grand Touring, Grand Touring | 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Lincoln Aviator Filler Neck
Part Number: L1MZ-9034-X
$78.78 MSRP: $114.67
You Save: $35.89 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Fuel Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe
- Replaces: L1MZ-9034-C, L1MZ-9034-Q, L1MZ-9034-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Lincoln Aviator | Base, Black Label, Livery, Reserve | 6 Cyl 3.0 L GAS
View related parts
Lincoln Aviator Filler Hose
Part Number: 4L2Z-9047-AA
Product Specifications
- Other Name: Hose - Filler Pipe; Fuel Filler Hose; Filler Neck Hose; Fuel Hose; Hose
- Replaces: 1L2Z-9047-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Lincoln Aviator | Base | 8 Cyl 4.6 L GAS

Lincoln Aviator Fuel Filler Hose

Welcome to our website where you can discover high-quality, genuine Lincoln Aviator Fuel Filler Hose. We offer an extensive inventory of OEM Lincoln Aviator Fuel Filler Hose at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Lincoln Aviator Fuel Filler Hose Parts Questions & Experts Answers

Filler Hose
4L2Z-9047-AA
Q: How should one service the fuel filler hose safely and effectively on Lincoln Aviator?
A: Avoid smoking and open flames near the fuel components because the system houses flammable mixtures when servicing the fuel filler hose. The fuel system pressure needs to be relieved before removing any fuel lines or components because it helps to stop accidental fuel spraying. Users should start the process by placing the vehicle on HOIST equipment in NEUTRAL and disconnecting the battery ground cable. When putting back the fuel filler pipe attach its screws tightly to 2 Nm (18 lb-in) torque. The two bolts securing the fuel filler pipe need to be removed from their frame position until you reach torque specifications of 20 Nm (15 lb-ft) for installation. You should disconnect the fuel filler pipe from the fuel tank hose as well as the vapor tube from the dust separator and the rear axle vent hose. Early build vehicle owners need to access the fuel vapor tube through their right-hand rear wheel well and detach it from the fuel vapor tee followed by unclipping the hose retainer from the fuel tank shield. Users can disconnect the fuel vapor vent tube from the inner fenderwell by depressing both tabs on the cable inside the fuel filler door compartment of late build vehicles. For the installation process reverse the steps of removal by reinstalling the fuel filler pipe before completing the procedure.