Ford XS8Z-10V346-ADRM
Alternator

Service the alternator of vehicles without a returnless fuel system by first disconnecting the battery ground cable while ensuring both no smoking and no open flames exist due to the high risk of vapor ignition. Unplug both generator electrical connectors after removing the air cleaner outlet pipe together with the intake air resonator. The vehicle should be lowered after removing the accessory drive belt. Mark a point for generator connection and then detach the unit by first removing the lower bolt and secondly disconnecting both fuel supply and return lines. Placing extra care is essential because the removal space places limitations that could lead to damaging hoses or cables. To install the component follow the backward order of removal steps with continued attention to safety protocols for flammable materials.

The service of an alternator on vehicles with a returnless fuel system requires users to start by disconnecting the battery ground cable and avoiding smoking and open flames since these can ignite flammable vapors. Begin by disconnecting the generator electrical connectors while also taking out the air cleaner outlet pipe alongside the intake air resonator. Reach the accessory drive belt and then decrease the position of the vehicle. Remove the fuel supply line at the fuel injection supply manifold before detaching the generator by unstitching its lower bolt. Handle the removal process with care because restricted space could result in damage to any hoses or cables. During assembly you should reversely perform the uninstatllation procedure while maintaining safety protocols about flammable elements.