Ford 6H6Z-5467112-AF
Armrest Assembly, Sand

The service process for the rear seat armrest starts with removing the rear seat cushion and continuing with removal of the 60 percent rear seat backrest. To gain access to the armrest-to-backrest bolts one should first free the lower J-strip and then partially rotate the backrest trim cover inward. You must first detach the four armrest-to-backrest bolts and support plate. The installation requires horizontal adjustment of the armrest and subsequent tightening of bolts to 10 Nm (89 lb-in). Before reinstalling the armrest and bracket assembly to the backrest maintain correct alignment of the bracket locator tab to the backrest frame while setting it aside. To remove the armrest assembly the operator should push out function the four pin retainer pins on the backrest to disconnect the trim panel and detach both parts. The remaining fragment of any broken retainer should go through the backrest frame before adding a brand new pin-type retainer for reassembly. Both backrest assembly removal needs to be followed by integrating the 60 percent segment before installing the rear seat cushion in the final stage.