Ford F5OY5A772B
Stabilizer Bar, Rear

The air suspension system service begins with turning off the air suspension switch inside the rear jack storage area because this step prevents sudden changes in air spring inflation or deflation. The service requires hoisting the vehicle followed by wheel removal. First, loosen the nut and remove it from the stud with the hex-hold tool before taking out the nuts along with the rear sway bar kit. Rephrase the installation procedure by first unbolting the insulator bracket from the sway bar kit bracket, then removing both components together with their respective sway bar kit and insulators. Placement of the rear sway bar kit with the green color mark should face toward the right side of the vehicle before applying insulators, then inserting the bar into its position. The sway bar kit bracket and its mounting bolts should be installed while avoiding boot seal damage; use hex hold functionality to install the nut which prevents stud rotation. Install the sway bar kit link followed by nuts before putting back the wheel assembly and lowering the vehicle before switching on the air suspension service control. Proper replacement of suspension fasteners requires new parts with identical part numbers or equivalent equivalents together with following torque specifications for complete component retention.

Exercise extreme care not to damage the boot seal and avoid using power tools to prevent bearing and seal damage.