Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Ford 1U2Z-2V200-HA
Brake Pads

1997-2003 Ford 1U2Z2V200HA

Customer Questions & Expert Answers (6)
Ford 1U2Z-2V200-HA Brake Pads
  • Part Description
    Kit - Brake Shoe And Hardware; Disc Brake Pad Set
  • Base No.
    2200
  • Manufacturer
    Ford
Make sure this part fits
$5.34 MSRP: $7.38
You Save: $2.04 (28%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • 1999 Ford Escort Brake Pads Diagram for 1U2Z-2V200-HA
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 1U2Z-2V200-HA

  • Product Specifications

    BrandGenuine Ford
    Base No.2200
    Manufacturer Part Number1U2Z-2V200-HA
    Part DescriptionKit - Brake Shoe And Hardware; Disc Brake Pad Set
    Other NamesRear Pads
    Manufacturer NoteRear disc
    Item Dimensions2.6 x 3.9 x 4.5 inches
    Item Weight1.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKU1U2Z-2V200-HA
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2003 Ford EscortBase, LX, SE, Sport, ZX2, ZX2 Cool Coupe, ZX2 Hot Coupe, ZX2 S/R4 Cyl 2.0 L GAS
    1997-1999 Mercury TracerGS, LS, Trio4 Cyl 2.0 L GAS

  • Customer Questions & Expert Answers

    Q:
    Is 1U2Z-2V200-HA the part I need for my vehicle? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 1U2Z-2V200-HA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How should one safely service front brake pads to handle potential asbestos fiber dust on Ford Escort? Posted by Customer
    A:
    The handling of potential asbestos fiber dust during front brake pad service must follow safe procedures because breathing it carries health dangers. A special asbestos-fiber vacuum cleaner should be used along with OSHA-compliant bag labeling to seal the materials properly and direct the trash hauler about these contents. A special vacuum cleaner serves the best when cleaning but workers can substitute with government-sanctioned toxic dust purifying respirators if dust formation is probable. Start with vehicle positioning support before removing the tire-wheel assembly by dissembling lug nuts. The operation begins with W-spring and M-spring detaching before locating pins from disc brake calipers need to be taken off. First remove the front disc brake pads along with shims from the caliper before fully pushing the caliper piston inside its bore. Apply Silicone Brake Caliper Grease as well as Dielectric Compound D7AZ-19A331-A Motorcraft WA-10 or an equally approved substance under Ford specification ESE-MIC171-A to either side of the perforated shim during installation. The installation process concludes by carrying out the reverse steps and properly tightening the lug nuts according to their specified sequence.
    Posted by FordPartsDeal Specialist
    Q:
    What is the next step after removing the wheel for the 2002 Ford Escort? Posted by Customer
    A:
    Remove the screw plug and turn the brake adjuster screw counterclockwise to fully retract the piston.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Pads
    Q:
    What is necessary for installation after removing the brake pads for the 2003 Ford Escort? Posted by Customer
    A:
    Adjust the rear disc brake caliper.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Pads
    Q:
    How should the installation be completed for the 2001 Ford Escort? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Pads
    Q:
    What is the next step after removing the wheel for the 2000 Ford Escort? Posted by Customer
    A:
    Remove the screw plug and turn the brake adjuster screw counterclockwise to fully retract the piston.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Pads
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford 1U2Z-2V200-HA, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # 1U2Z-2V200-HA Brake Pads. It is sometimes referred to as Ford Brake Pads. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford 1U2Z2V200HA Brake Pads. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery