Ford F8RZ-6322050-BB
Ignition Lock Cylinder

The process to service and repair a door lock cylinder begins by taking out the door exterior handle followed by the lock cylinder after bending up its tag. The reverse of removal steps applies to installation.

The service and repair process for the ignition lock cylinder starts by taking off the steering column lower shroud. Congruous ignition lock cylinders need to be ordered using the Ford/Lincoln Mercury Dealership network. The first step includes disconnecting the passive anti-theft system transceiver by unfeathering its electrical connector while unscrewing the device and completing removal of the transceiver. The first step to remove the ignition lock cylinder involves inserting your key to accessory position (I) while depressing the retainer and extracting the lock cylinder. The installation process of the new ignition lock cylinder will be the reverse of removal steps.

Service and repair of the ignition lock cylinder demands a starting point of steering column lower shroud removal. Customers need to purchase ignition lock cylinders from Ford/Lincoln Mercury Dealerships which correspond to their existing vehicle keys. The service begins with taking out the passive anti-theft system transceiver after disconnecting its electrical connector and securing screw. When removing the ignition lock cylinder, users must position the key to accessory mode (position 1) to depress the retainer before extracting the lock cylinder. The locking process for new lock cylinders follows the exact opposite steps compared to removal.

You must start door lock cylinder servicing and repair by taking off the door exterior handle. As the next step lift the tag upward while unlocking and taking out the lock cylinder. Install the lock cylinder by following the opposite order of removal steps.

Insert and turn the key to the accessory position (I), depress the retainer, and then remove the cylinder.