Ford BA5Z-54042D94-A
Inflator Curtain, Passenger Side

Pay attention to passenger air bag module servicing because you should always handle air bags by pointing their air bag and deployment door/trim cover/tear seam components toward the opposite of your body while setting the modules with seam orientation facing upward to prevent serious injuries from deployment activation. When working with air bag and Safety Canopy(R), or side air curtain components never perform connector probing activities to avoid accidental deployment that results in dangerous injuries or death. When you remove the correct Restraints Control Module (RCM) fuse while the ignition is ON the air bag warning indicator will turn on. Before handing the vehicle to customers ensure correct operation and faultless functionality of the Supplemental Restraint System (SRS). The SRS needs to be depowered initially before technicians separate the instrument panel upper section followed by the removal of 4 screws and 2 air ducts. Twelve screws lead to the removal of the passenger air bag module which needs to be pulled from the instrument panel area. The installation process follows the opposite steps of removal until the screws achieve a torque value of 9 Nm (80 lb-in). The service completion requires the repowering of the SRS system.

Avoid probing the electrical connectors on air bag, Safety Canopy(R), or side air curtain modules.