Ford 2C5Z-78632A22-AA
Seat Back Pad

The service and repair of the rear seat cushion for the 20 percent second row starts with removing the second row seat. The service provider should disassemble components according to the provided illustration and table while carrying out the steps for each item included. Begin with the backrest latch bolts by pinching the retainer clip to release the release handle cable before removing the cable end hook from the retaining hole and placing the cable aside. The seat backrest J-clip requires release before you can remove all staples enabling you to lift the material for access to the backrest nut and bolts. You should handle seat cushion trim cover disassembly carefully because hook and loop fasteners might break the hook and loop strip from the seat cushion foam pad. Reassembly of the broken vehicle part requires following the reverse order of disassembly procedures.

Release the J-clips that attach the seat cushion trim cover to the cushion pan.

First, remove the release handle cable by pinching to release the retainer clip, then detach the cable end hook from the retaining hole and position the cable to the side.

Exercise caution to avoid tearing the hook and loop strip from the seat cushion foam pad while separating the hook and loop fasteners.