MKZ | 2013-2020 | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
Continental | 2017-2020 | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
Q: How to service the third row 40 percent rear seat cushion on Lincoln Navigator?
A: To service the third row 40 percent rear seat cushion, remove the seat backrest, then the slide bracket nuts and bolts connecting the seat riser. Detach the frame from the foam, being careful with the trim cover. Reassemble by reversing these steps.
Q: How to remove and install the rear seat cushion safely on Lincoln Town Car?
A: To take out the rear seat cushion, push the lower front, backward to unlock retainers, and move it forward. In heated seats, use disconnect electrical connectors. When removed, be sure to position retaining wires correctly so that they do not slide on an impact. Do the reverse process of installation with the safety belts available.