Ford 5W1Z-54632A23-BA
Seat Cushion Pad, Driver Side

Begin by pushing the lower front section of the rear seat cushion pad and frame until the front retainers release. Then continue by moving the rear seat cushion backward thus positioning it forward. Before beginning the work you must identify electrical connectors on rear heated seats and then detach them. The personal injury risk becomes reduced when the retaining wires in both the rear seat cushion pad and frame and rear seat backrest pad and frame securely remain in place within the retainer brackets. The installation of the rear seat cushion should be done backward from its removal steps with safety belts and their buckles kept accessible for occupants.

Apply pressure to the lower front portion of the rear seat cushion pad and frame, then push the rear seat cushion rearward to disengage the front retainers and position the cushion forward.

Apply pressure to the lower front portion of the rear seat cushion pad and frame, then push the rear seat cushion rearward to disengage the front retainers, and position the cushion forward.

Always wear safety glasses to protect against potential injury from accidental air bag deployment, and wash hands with soap and water after handling the air bag module due to possible sodium hydroxide deposits.

Disconnect the electrical connectors and label them for easier installation later.

Failure to do so can result in personal injury.

Wash hands with soap and water to remove any sodium hydroxide residue.

To prevent the seat backrest and cushion from sliding forward during a collision, which may result in personal injury.

Apply pressure to the lower front portion of the rear seat cushion pad and frame, then push the rear seat cushion rearward to disengage the front retainers.