Ford F8CZ-3600-AAA
Steering Wheel, Black

Service of the steering wheel demands that you take off the steering wheel bolt and driver side air bag module. The steering column shaft must not receive any hammer strikes because this will result in column collapse. You should disconnected the steering wheel by using the Steering Wheel Puller tool. Secure the air bag sliding contact with tape to keep its position in place before advancing with the work. Disconnecting then reconnecting the battery will result in short-term abnormal driving symptoms because the vehicle has to adapt its adaptive strategy during which you should drive the car for at least 16 km (10 mi). You should perform the installation process following the exact opposite steps you followed for removal.

You should take out the driver side air bag module along with the steering wheel bolt before servicing and repairing the steering wheel. You must never let your hammer strike the steering column shaft since this could result in column collapse. The job should be done using a Steering Wheel Puller for a secure detachment. Use tape to secure the air bag sliding contact in place when performing the operation. The temporary abnormal drive symptoms during vehicle relearning of its adaptive strategy may appear after battery disconnect and reconnect because the car requires at least 16 km (10 mi) of driving. Reverse all step procedures needed to install the components.