Ford 2L7Z-7806200-AA
Door Check

The service procedure for the front door check requires you to first remove the lower cowl trim panel together with the door scuff plate. The left side requires removal of the parking brake control assembly which should be put aside for the procedure. The next step requires removal of the lower cowl panel weather shield. The process proceeds by disconnecting the 2 door check arm-to-door bolts with subsequent untightening of 2 door check arm nuts. The left side example is shown but the right side procedure is equivalent. Afterward, remove the door check arm from the door opening of the lower cowl panel. Finishing the setup requires doing the opposite steps that were used for removal.

Service and repair of the front door check begins with removing the lower cowl trim panel followed by the door scuff plate from the left side. The next step includes removing the parking brake control assembly before placing it on the side. The first step involves removing the lower cowl panel weather shield first while also unfastening the two door check arm-to-door bolts. The displayed image shows the left side of the structure with a matching appearance on its right side. Understand that service and repair of the front door check begins by untightening the two door check arm nuts before extracting the door check arm through the opening in the lower cowl panel. The installation process requires the execution of the opposite steps used during removal.