Ford XS8Z-9092-AB
Strap, Driver Side

Service the fuel tank straps while maintaining safety by staying away from both smoking and open flames close to fuel-linked components because highly flammable vapors exist. You should first elevate and stabilize the vehicle for commencement. The first step consists of disconnecting exhaust hanger insulators while providing support to the exhaust system. The next step involves removing the center exhaust heat shield and breaking free stabilizer bar clamps together with links. Install proper packing to safeguard the fuel tank bottom before removing its strap bolts and partially lowering the fuel tank. You should then proceed to remove both the stabilizer bar and fuel tank straps. You should execute an inverse installation process when reinstalling the system.

Before performing work on fuel tank straps, you must first lift the vehicle and provide it with adequate support. First, remove the exhaust hanger insulators before detaching the system, but maintain support to the exhaust at all times. Start by taking out the center exhaust heat shield, followed by disconnecting the stabilizer bar clamps along with its links. Support the fuel tank with proper packing materials on its bottom surface before removing strap bolts to lower the tank partially. Proceed to disassemble the stabilizer bar and the fuel tank straps afterward. Configure the installation by performing the opposite steps from removal and monitor potential flammable vapor situations.

Support the fuel tank using suitable packing material to prevent damage to its underside.