My Garage
Cart
Make sure this part fits

Ford 6L5Z-19D850-BA
Suction & Discharge Hose Assembly

1999-2008 Ford Ranger 6L5Z19D850BA

Customer Questions & Expert Answers (10)
Ford 6L5Z-19D850-BA Suction & Discharge Hose Assembly
  • Part Description
    Tube - Compressor To Manifold; A/C Refrigerant Liquid Hose; A/C Hose
  • Base No.
    19D850
  • Replaces
    XL5Z-19D850-BA
  • Manufacturer
    Ford
Make sure this part fits
$87.07 MSRP: $143.27
You Save: $56.20 (40%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.19D850
    Manufacturer Part Number6L5Z-19D850-BA
    Part DescriptionTube - Compressor To Manifold; A/C Refrigerant Liquid Hose; A/C Hose
    Other NamesHose & Tube Assembly
    Manufacturer NoteManifold And Tube Assy
    Item Dimensions11.6 x 8.0 x 37.9 inches
    Item Weight3.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ReplacesXL5Z-19D850-BA
    ManufacturerFord
    SKU6L5Z-19D850-BA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2008 Ford RangerEdge, Sport, STX, Tremor, XL, XLT6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 6L5Z-19D850-BA the part I need for my vehicle? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 6L5Z-19D850-BA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How should the installation be performed for the 2001 Ford Ranger? Posted by Customer
    A:
    Reverse the removal procedure, ensuring to lubricate the refrigerant system with the correct amount of clean PAG oil or equivalent and install new O-ring seals that have been lubricated in clean PAG oil or equivalent.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the next step after disconnecting the compressor manifold for the 2005 Ford Ranger? Posted by Customer
    A:
    Disconnect the pressure cutoff switch electrical connector and the discharge line from the condenser core, again discarding the O-ring seal.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    Should the lubricant be added to the refrigerant system for the 2004 Ford Ranger? Posted by Customer
    A:
    No, do not add it to the refrigerant system as an A/C compressor lubricant.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done to access the condenser core for the 2003 Ford Ranger? Posted by Customer
    A:
    Remove the screws to tilt the radiator back, then take out the screws securing the condenser core, noting that it may be necessary to remove the radiator from the mounting saddles for better access.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    How should the condenser inlet fitting be handled for the 2006 Ford Ranger? Posted by Customer
    A:
    Remove the condenser inlet fitting nut, disconnect the fitting, discard the O-ring seal, and ensure to tighten the new fitting to 8 Nm (71 lb-in) upon installation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done during installation regarding the manifold bolt for the 2007 Ford Ranger? Posted by Customer
    A:
    Ensure to tighten the manifold bolt to 20 Nm (15 lb-ft).
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done with the O-ring seals during installation for the 2002 Ford Ranger? Posted by Customer
    A:
    Install new O-ring seals that have been lubricated in clean PAG oil or an equivalent.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    How should the installation be performed for the 2000 Ford Ranger? Posted by Customer
    A:
    Reverse the removal procedure, ensuring to lubricate the O-ring seal with Motorcraft YN-12c refrigerant oil or an equivalent that meets Ford specification WSH-M1C231-B.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the first step in servicing and repairing the compressor manifold and tube assembly for the 2008 Ford Ranger? Posted by Customer
    A:
    Begin by recovering the refrigerant.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford 6L5Z-19D850-BA, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # 6L5Z-19D850-BA Suction & Discharge Hose Assembly. It is sometimes referred to as Ford A/C Hose. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford 6L5Z19D850BA Suction & Discharge Hose Assembly. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery