FordParts
My Garage
My Account
Cart
OEM 2000 Ford Contour Starter
Starter Ignition- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Starters found
2000 Ford Contour Starter Part Number: F3RZ-11002-CRM
Product Specifications- Other Name: Remanufactured Starter Motor Assembly; Starter Motor Reman; Starter Motor; Starters
- Base No.: 11002
- Item Weight: 9.90 Pounds
- Item Dimensions: 5.2 x 7.4 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F3RZ-11002-CRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Contour Starter Part Number: F3RZ-11002-ARM
Product Specifications- Other Name: Remanufactured Starter Motor Assembly; Starter Motor; Starter Motor Reman; Starters; Starter Motor Assembly
- Base No.: 11002
- Item Weight: 9.00 Pounds
- Item Dimensions: 5.1 x 7.1 x 10.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F3RZ-11002-ARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Contour Starter Part Number: F3RZ-11002-BRM
Product Specifications- Other Name: Remanufactured Starter Motor Assembly; Starter Motor; Starter Motor Reman; Starters; Starter Motor Assembly
- Replaces: F3RZ-11V002-BRM
- Base No.: 11002
- Item Weight: 9.10 Pounds
- Item Dimensions: 5.1 x 7.4 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F3RZ-11002-BRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Contour Starter
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Contour Starter available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Contour Starter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Ford Contour Starter Parts Q&A
- Q: How to service and repair the starter motor on 2000 Ford Contour?A: The starter motor servicing process starts with removing the positive brush connector nut at the M-terminal of the starter solenoid before removing the two screws on the solenoid and disconnecting it from the rest of the parts. Moreover the drive end housing separation from the starter frame requires removal of two through bolts before extracting the starter drive stop ring from the output shaft through stop ring retainer and ring removal steps. Proceed to remove the starter drive from the output shaft before disconnecting the drive lever and pin from the starter drive along with extracting the output shaft and stationary gear but make sure to retain the armature thrust ball found between the end of the starter motor armature shaft and the output shaft for reassembly. Separate the output shaft from the stationary gear after removing the planet gear retainer and then the armature thrust washer by first taking off the Truarc C-ring and washer. The bolts securing the brush end plate and bushing should be unscrewed first before taking off both components. The starter motor armature must be removed from the starter frame after separating both the brush holder and then the armature. Reverse the disassembly process while applying Ford specification WSG-M1C218-B2 low-temperature grease thinly to both ends of the armature shaft along with its splines for assembly.