My Garage
Cart

OEM 2000 Ford Contour Sway Bar Link

Stabilizer Sway Bar Link
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Sway Bar Link found

  • 2000 Ford Contour Sway Bar Link Diagram - YS7Z-5K484-AA
    View related parts

    2000 Ford Contour Stabilizer Link Part Number: YS7Z-5K484-AA

    $6.74 MSRP: $10.95
    You Save: $4.21 (39%)
    ADD TO CART
    Product Specifications
    • Other Name: Link; Suspension Stabilizer Bar Link Kit; Sway Bar Link
    • Manufacturer Note: Link
    • Replaces: F5RZ-5K484-B
    • Base No.: 5K484
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 20.6 x 8.2 x 1.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: YS7Z-5K484-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2000 Ford Contour Submodels:
    • Base, GL, GL Sport, LX, LX Sport, SE, Sport, SVT | 4 Cyl 2.0 L BI-FUEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

2000 Ford Contour Sway Bar Link

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Contour Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Contour Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Contour Sway Bar Link Parts Q&A

  • Q: How to Service and Repair the Sway Bar Link on 2000 Ford Contour?
    A: The first step for servicing or repairing the sway bar link requires vehicle elevation and support by proper methods. Detach the sway bar connecting links and bushings from the front lower arms on both sides before you remove sway bar clamps from each end. The right-hand tie-bar should be unfastened from the wheel spindle before sway bar removal. A technical requirement states that you should perform the final tightening of rear suspension components only after the vehicle is situated on its wheels. The installation order starts with the sway bar before proceeding to connect the right-hand tie-bar to the wheel spindle. To finish the installation, you need to put the sway bar onto the crossmember followed by its attachment to each side before you connect sway bar connecting links onto both front lower arms.