FordParts
My Garage
My Account
Cart
OEM 2000 Ford Escort Radiator
Cooling Radiator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Radiators found
2000 Ford Escort Radiator Part Number: F5CZ-8005-A
Product Specifications- Other Name: Radiator Assembly
- Base No.: 8005
- Item Weight: 6.50 Pounds
- Item Dimensions: 33.8 x 7.1 x 21.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5CZ-8005-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Escort Radiator Part Number: F8CZ-8005-AA
Product Specifications- Other Name: Radiator Assembly
- Manufacturer Note: DOHC
- Base No.: 8005
- Item Weight: 12.10 Pounds
- Item Dimensions: 32.6 x 5.5 x 22.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8CZ-8005-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Escort Radiator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Escort Radiator available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Escort Radiator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Ford Escort Radiator Parts Q&A
- Q: How to service and repair the radiator on 2000 Ford Escort?A: The radiator repair process begins with raising the vehicle after draining its contents. First remove bolts which fasten the right-hand splash shield before disconnecting the lower radiator hose followed by removal of the lower oil cooler outlet tube if installed. Start by lowering the vehicle before you detach the upper radiator hose from the radiator alongside any present upper oil cooler inlet tube. First cut the connection at the fan motor before removing both the radiator cap along with the overflow hose (8075). To start the process remove the bolts and nuts fixing the A/C condenser core to its brackets near the radiator top then detach the radiator and shroud assembly from the vehicle. You need to take out the bolts enabling the removal of the fan motor together with the blade and shroud assembly. Follow the reverse order of steps used for removal to install. Use Ford Premium Engine Coolant E2FZ-19549-AA (F5FZ-19549-CC in Oregon, Motorcraft CXC-8-B in Canada) or an equivalent that satisfies Ford specification ESE-M97B44-A and perform 50/50 water mixture for filling the cooling system. Begin engine operation and examine every hose system component for leaks before waiting for the water thermostat to open during engine heat-up. Stop the engine before performing maintenance on the coolant recovery reservoir by filling it with fluid to keep the minimum cold fill level.