How to service the windshield wiper motor on 2000 Ford Excursion?

Service of the windshield wiper motor starts with removing the cowl top vent panels. First separate the assembly of wiper mounting arm and pivot shaft through the removal of five bolts and discontinuing the electrical connection. Plan to take out the bolt fastening the windshield wiper linkage before you detach the bolts which fasten the windshield wiper motor. You should perform the converses of disassembly measures to complete installation procedures.

OEM 2000 Ford Excursion Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Motor found

View related parts
2000 Ford Excursion Wiper Motor, Front
Part Number: 2C3Z-17508-BA
Product Specifications
- Other Name: Windscreen Wiper; Windshield Wiper Linkage, Front; Windshield Wiper Motor; Wiper Linkage; Motor & Linkage; Front Motor
- Manufacturer Note: Motor and linkage, 5 pin connector, front
- Position: Front
- Replaced by: 6W1Z-17508-CARM
- Base No.: 17508
- Item Weight: 3.50 Pounds
- Item Dimensions: 6.2 x 4.6 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C3Z-17508-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Excursion Submodels:
- Limited, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL

2000 Ford Excursion Wiper Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Excursion Wiper Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Excursion Wiper Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Excursion Wiper Motor Parts Questions & Experts Answers

Q: How to service the windshield wiper motor on 2000 Ford Excursion?
A: Service of the windshield wiper motor starts with removing the cowl top vent panels. First separate the assembly of wiper mounting arm and pivot shaft through the removal of five bolts and discontinuing the electrical connection. Plan to take out the bolt fastening the windshield wiper linkage before you detach the bolts which fasten the windshield wiper motor. You should perform the converses of disassembly measures to complete installation procedures.