My Garage
Cart

OEM 2000 Ford F-350 Super Duty Blend Door Actuator

Air Blend Door Actuator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

  • 2000 Ford F-350 Super Duty Blend Door Actuator Diagram - 3C3Z-19E616-BA
    View related parts

    2000 Ford F-350 Super Duty Actuator Part Number: 3C3Z-19E616-BA

    $75.69 MSRP: $124.55
    You Save: $48.86 (40%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Motor Assembly; HVAC Air Inlet Door Actuator; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator
    • Replaces: 3C3Z-19E616-AA, YH-1859
    • Base No.: 19E616
    • Item Weight: 1.00 Pounds
    • Item Dimensions: 8.2 x 4.5 x 6.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 3C3Z-19E616-BA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2000 Ford F-350 Super Duty Submodels:
    • Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

2000 Ford F-350 Super Duty Blend Door Actuator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford F-350 Super Duty Blend Door Actuator available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford F-350 Super Duty Blend Door Actuator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford F-350 Super Duty Blend Door Actuator Parts Q&A

  • Q: How to service the Blend Door Actuator for auxiliary climate control on 2000 Ford F-350 Super Duty?
    A: Service of the air door actuator/motor used in auxiliary climate control begins by removing the third row seat followed by removal of the right-hand rear quarter trim panel. Remove the blend door actuator by first detaching its connector and unscrewing and removing all hardware components. You should follow the installation steps in reverse order after finishing the uninstallation.