How to service the rear window wiper motor on 2000 Ford F-350 Super Duty?

Service of the rear window wiper motor begins with removing the rear pivot arm followed by lifting off the trim panel on the liftgate. Unscrewing the three bolts securing the rear wiper motor is the first step before disconnecting its electrical connector. Completion of installation occurs when the reverse process is used after removing the motor.

OEM 2000 Ford F-350 Super Duty Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Motor found

View related parts
2000 Ford F-350 Super Duty Wiper Motor, Front Part Number: 2C3Z-17508-BA
Product Specifications
- Other Name: Windscreen Wiper; Windshield Wiper Linkage, Front; Windshield Wiper Motor; Wiper Linkage; Motor & Linkage; Front Motor
- Manufacturer Note: Motor and linkage, 5 pin connector, front
- Position: Front
- Replaced by: 6W1Z-17508-CARM
- Base No.: 17508
- Item Weight: 3.50 Pounds
- Item Dimensions: 6.2 x 4.6 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C3Z-17508-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-350 Super Duty Submodels:
- Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL

2000 Ford F-350 Super Duty Wiper Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford F-350 Super Duty Wiper Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford F-350 Super Duty Wiper Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford F-350 Super Duty Wiper Motor Parts Q&A

Q: How to service the rear window wiper motor on 2000 Ford F-350 Super Duty?
A: Service of the rear window wiper motor begins with removing the rear pivot arm followed by lifting off the trim panel on the liftgate. Unscrewing the three bolts securing the rear wiper motor is the first step before disconnecting its electrical connector. Completion of installation occurs when the reverse process is used after removing the motor.