FordParts
My Garage
My Account
Cart
OEM 2000 Lincoln LS Air Bag Control Module
SRS Airbag Module- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Air Bag Control Module found
2000 Lincoln LS Control Module Part Number: XW4Z-14B321-CA
$243.91 MSRP: $334.65You Save: $90.74 (28%)Product Specifications- Other Name: Sensor Assembly - Airbag; SDM Module; Sensor Assembly - Air Bag
- Base No.: 14B321
- Item Weight: 1.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-14B321-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Lincoln LS Air Bag Control Module
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Lincoln LS Air Bag Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Lincoln LS Air Bag Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Lincoln LS Air Bag Control Module Parts Q&A
- Q: What is the Importance of the Air Bag Control Module in the Supplemental Restraint System (SRS) and What Precautions Should Be Taken During Its Inspection and Installation on 2000 Lincoln LS?A: The Restraint Control Module (RCM) functions as the vital component for air bag Supplemental Restraint System (SRS) operation thus needing its proper orientation to be protected. An RCM replacement is necessary even without air bag deployment when the vehicle suffered a collision that damaged the center tunnel area because the mounting and bracket exhibit deformation. Complete replacement with proper mounting area restoration is required. All personnel working with SRS vehicles and air bag modules need to wear protective safety glasses because accidental deployment injuries can occur. It is vital to check sensor orientation following a collision since you need to replace and place correctly any SRS components which show damage. The back up power supply should be drained by disconnecting the battery ground cable while waiting for one minute. Personal and accidental safety demands complete cut-off of all additional batteries and power supplies during this procedure. The electronic modules exhibit sensitivity to static charges because this leads to system harm. The system demands new components to fix it; reinstall the original part before undertaking another diagnostic process if problems arise. Installation requires reversing all removal procedures starting with disconnecting the battery ground cable followed by removing the center console and rear vent duct and extension duct and moving the shifter aside before disconnecting the shifter interlock cable then removing the shifter retaining bolts and at last removing the RCM by removing its electrical connector locking clips and disconnecting electronic connectors. Proceed with testing the functioning of the air bag system post-installation.