OEM 2000 Lincoln LS Automatic Transmission Filter

2000 Lincoln LS Automatic Transmission Filter Parts Questions & Experts Answers

• Q: How to Service and Repair the Automatic Transmission Filter on 2000 Lincoln LS?

  A: Service and repair of the automatic transmission fluid filter begins by lifting the vehicle before placing a drain pan under the transmission fluid pan. Drain the fluid through the drain plug and then proceed to take out the bracket. The transmission fluid pan gasket has reusability; inspect and clean it before deciding to reuse it if it shows no noticeable damages. Secondly discard the old transmission fluid filter then clean and inspect both the transmission fluid pan and magnet. Before installation remove the converter housing plug and the drain plug from their locations. The installation requires a new drain plug to avoid fluid leakages before adding the drain plug and converter housing access plug. The installation of the transmission fluid filter requires MERCON (R) V Automatic Transmission Fluid XT-5-QM or an equivalent product following Ford specifications MERCON (R) V to protect the O-ring seals from damage while properly seating the seals before the filter installation. Mount the oil pan magnet inside the transmission fluid pan before reinstalling the pan together with its gasket while keeping the screws loosely attached. Begin screw installation by crossing the bolts in a pattern and finish off by placing the shifter cable bracket. Begin by using a 5/16 inch Allen key to remove the fill plug before installation of the drain plug. The fluid level indicator plug can be removed using a 3/16 inch Allen key for filling the transmission until liquid starts to flow from the fluid level hole which verifies correct fluid level. The last step includes a fluid level examination.