FordParts
My Garage
My Account
Cart
OEM 2000 Lincoln Navigator Drive Shaft
Axle Shaft- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Drive Shafts found
2000 Lincoln Navigator Drive Axle, Front Passenger Side Part Number: 3L3Z-3219-AA
$111.66 MSRP: $154.46You Save: $42.80 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Shaft - Front Axle; Drive Axle Shaft, Front Right; Axle Shaft; Axle Shafts; Axle Assembly
- Position: Front Passenger Side
- Replaces: F65Z-3219-AA
- Item Weight: 9.00 Pounds
- Item Dimensions: 27.5 x 5.5 x 13.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L3Z-3219-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Lincoln Navigator Drive Shaft Part Number: F75Z-4A376-BB
Product Specifications- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4A376
- Item Weight: 24.00 Pounds
- Item Dimensions: 43.5 x 5.3 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F75Z-4A376-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Lincoln Navigator Drive Shaft Part Number: XL1Z-4602-AA
Product Specifications- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Dimensions: 36.1 x 5.2 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL1Z-4602-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Lincoln Navigator Drive Shaft
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Lincoln Navigator Drive Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Lincoln Navigator Drive Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Lincoln Navigator Drive Shaft Parts Q&A
- Q: What Steps Should Be Taken Before Removing and Installing the Drive Shaft to Ensure Safety and Proper Procedure on 2000 Lincoln Navigator?A: The removal and installation of the drive/propeller shaft must start with switching off the air suspension switch at the rear jack storage area to stop air spring inflation or deflation which could move the vehicle while working and cause personal injury. Securely position the vehicle in neutral before providing supporting methods for its lift. Index the positions of the bearing yoke at the driveshaft flange mount and the pinion flange keeper as well as the driveshaft and extension housing. Lower the driveshaft and pull it free from the output shaft after disconnecting the driveshaft flange yoke from the pinion flange by removing the four bolts. An extension housing plug should be installed to avoid fluid drainage. The original bolts used for retaining the driveshaft with the axle require Threadlock and Sealer E0AZ-19554-AA or equivalent products that follow Ford specification WSK-M2G351-A5 when new replacement bolts are unavailable. The installation can be finished by following all steps in the reverse order of removal.
Related 2000 Lincoln Navigator Parts
2000 Lincoln Navigator CV Joint
2000 Lincoln Navigator Differential
2000 Lincoln Navigator Differential Bearing
2000 Lincoln Navigator Differential Pinion Bearing
2000 Lincoln Navigator Differential Seal
2000 Lincoln Navigator Driveshaft Yokes
2000 Lincoln Navigator Pinion Bearing
2000 Lincoln Navigator Slip Yoke
2000 Lincoln Navigator Transfer Case Shim
2000 Lincoln Navigator Universal Joint
2000 Lincoln Navigator Wheel Seal