My Garage
Cart

OEM 2000 Lincoln Town Car Water Pump

H2O Pump
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Water Pump found

  • 2000 Lincoln Town Car Water Pump Diagram - 3L3Z-8501-CA
    View related parts

    2000 Lincoln Town Car Water Pump Part Number: 3L3Z-8501-CA

    $49.93 MSRP: $80.55
    You Save: $30.62 (39%)
    Ships in 1 Business Day
    ADD TO CART
    Product Specifications
    • Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
    • Manufacturer Note: With M30 Hub
    • Replaced by: 5L3Z-8501-AC
    • Replaces: 5R3Z-8501-A, 5L2Z-8501-A, 1L2Z-8501-BB, F7UZ-8501-CA, F8AZ-8501-AA, PW-470, PW-387, YW7Z-8501-AA, AR3Z-8501-A, F4AZ-8501-A, AL3Z-8501-B, PW-499, YR3Z-8501-AB, YC2Z-8501-BA, PW-466, XC2Z-8501-BA
    • Base No.: 8501
    • Item Weight: 5.60 Pounds
    • Item Dimensions: 6.6 x 5.6 x 5.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 3L3Z-8501-CA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2000 Lincoln Town Car Submodels:
    • Anniversary, Base, Cartier, Cartier L, Cypress, Executive, Executive L, Jack Nicklaus, Signature, Touring Edition, Tournament Edition | 8 Cyl 4.6 L GAS

2000 Lincoln Town Car Water Pump

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Lincoln Town Car Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Lincoln Town Car Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Lincoln Town Car Water Pump Parts Q&A

  • Q: How to service and repair a water pump on 2000 Lincoln Town Car?
    A: The initial step to work on a water pump starts with draining coolant from the system. Begin by draining the coolant then loosen the bolts and remove the belt before detaching the bolts along with the water pump pulley. Then remove the water pump to perform cleaning of the mounting surface. It is essential to avoid rotating the water pump housing after its installation because it causes damage to the O-ring seal which results in leaks. Install a new O-ring seal and apply Premium Engine Coolant E2FZ-19549-AA, F5FZ-19549-CC which functions in Oregon or CXC-10 that fulfills Ford Specification ESE-M97B44-A in Canada before installation. You should start installation by doing the opposite steps of removal.