FordParts
My Garage
My Account
Cart
OEM 2001 Ford Crown Victoria Door Latch Assembly
Door Latch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Door Latch Assemblys found
Product Specifications- Other Name: Latch; Door Latch Assembly, Front Right; Door Lock; Lock; Door Latch Assembly
- Position: Front Passenger Side
- Replaces: 6W7Z-5421812-B, 6W7Z-5421812-A
- Base No.: 21812
- Item Weight: 1.70 Pounds
- Item Dimensions: 8.3 x 4.6 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9W7Z-5421812-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Actuator Assembly; Door Lock Actuator Motor, Rear Left, Rear Right; Door Lock Actuator Motor; Door Lock Actuator; Actuator
- Position: Rear Passenger Side
- Replaces: F8AZ-5426594-AA
- Base No.: 26594
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.2 x 19.4 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8AZ-5426594-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Crown Victoria Door Latch Assembly
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Crown Victoria Door Latch Assembly available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Crown Victoria Door Latch Assembly as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Ford Crown Victoria Door Latch Assembly Parts Q&A
- Q: How to Service and Repair the Front Door Latch Assembly on 2001 Ford Crown Victoria?A: Service and repair operations on the front door latch start with removal of both the front door trim panel along with the watershield. Proceed by removing the screw followed by moving the door latch release handle in order to separate it from the rod. You can release the actuating rod by opening the clip before disconnecting the door lock cylinder rod and the electrical connectors. First disconnect the electrical connector and afterward take out the rivet together with screws until the door lock actuator can be removed from the latch. Finally, remove the door latch. The reverse order of steps will be used to reassemble the parts.