FordParts
My Garage
My Account
Cart
OEM 2001 Ford Explorer Sport Brake Backing Plate
Brake Dust Shield- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Brake Backing Plates found
2001 Ford Explorer Sport Splash Shield, Front Passenger Side Part Number: 3L2Z-1214-AA
$11.48 MSRP: $16.28You Save: $4.80 (30%)Product Specifications- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Brake Dust Shield
- Position: Front Passenger Side
- Replaces: 1L2Z-1214-AA
- Base No.: 1214
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.2 x 13.1 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L2Z-1214-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Explorer Sport Splash Shield, Front Driver Side Part Number: 3L2Z-1214-BA
$10.65 MSRP: $15.10You Save: $4.45 (30%)Product Specifications- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Brake Dust Shield
- Position: Front Driver Side
- Replaces: 1L2Z-1214-BA
- Base No.: 1214
- Item Weight: 0.40 Pounds
- Item Dimensions: 13.3 x 13.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L2Z-1214-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Plate Assembly - Brake Back; Brake Backing Plate, Rear Left, Rear Right; Brake Dust Shield
- Manufacturer Note: Plate asy. - rear wheel brake - LH
- Position: Rear Driver Side
- Base No.: 2211
- Item Weight: 8.00 Pounds
- Item Dimensions: 14.1 x 14.3 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F65Z-2212-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Plate Assembly - Brake Back; Brake Backing Plate, Rear Left, Rear Right; Brake Dust Shield
- Manufacturer Note: Plate asy. - rear wheel brake - RH
- Position: Rear Passenger Side
- Base No.: 2211
- Item Weight: 8.30 Pounds
- Item Dimensions: 14.4 x 14.3 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F65Z-2211-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Brake Dust Shield
- Position: Front Passenger Side
- Base No.: 2K004
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L2Z-2K004-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Brake Dust Shield
- Position: Front Driver Side
- Base No.: 2K004
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L2Z-2K005-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Explorer Sport Brake Backing Plate
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Explorer Sport Brake Backing Plate available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Explorer Sport Brake Backing Plate as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Ford Explorer Sport Brake Backing Plate Parts Q&A
- Q: How to service the brake backing plate on 2001 Ford Explorer Sport?A: A proper backing plate service starts with removing the brake shoes and linings from the rear. To start servicing the backing plate begin by pulling back the parking brake cable spring before disconnecting the parking brake lever. The technician needs to detach either the axle shaft or the axle shaft together with the rear hub. Pull the parking brake rear cable and conduit from the brake backing plate through the usage of cable retainer compression. The service of the rear wheel cylinder begins after disconnecting the brake line fitting followed by taking out the two rear wheel cylinder bolts. The next step requires removal of the four bolts and nuts connecting the brake backing plate to the axle flange. The installation of the new backing plate requires following the reverse order of removal while performing brake system bleeding at the end.