FordParts
My Garage
My Account
Cart
OEM 2001 Lincoln Town Car HVAC Control Module
Heater Control Assembly- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 HVAC Control Module found
2001 Lincoln Town Car Temperature Control Part Number: 1W1Z-19980-AA
Product Specifications- Other Name: Control; Climate Control Module; Blower Control Switch; Dash Control Unit
- Replaces: YW1Z-19980-AA
- Base No.: 19980
- Item Weight: 2.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W1Z-19980-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Lincoln Town Car HVAC Control Module
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Lincoln Town Car HVAC Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Lincoln Town Car HVAC Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Lincoln Town Car HVAC Control Module Parts Q&A
- Q: How to service and repair the HVAC control module on 2001 Lincoln Town Car?A: Maintenance of the HVAC control module requires service workers to drain the engine cooling system first. The vacuum hoses and wire harness connector need to be removed from the evaporative emission canister purge valve which has part number 9C915. First remove and then disconnect the nut and nuts used for securing the evaporative emission canister purge valve before pulling out the valve itself. After loosening the heater hose clamps the heater hoses can be disconnected from the heater core while the heater hose can be removed by unclipping its clamp. The wire harness connector needs to disconnect next while removing the nut along with the stud. To remove the motor speed control perform screw removal. Installation requires following the reversal of removal steps while cleaning coolant hoses with Merpol ESE-M99B144-B (Coolant Hose Lubricant) or plain water according to need. Finish the process by adding coolant to the correct amount.