Other Name: Bulb; Center High Mount Stop Light, Rear; Engine Compartment, Back Up, Turn Signal; Parking, Dome, Interior, Tail, Car; Backup Lamp Bulb; Dome Lamp Bulb; Parking Lamp Bulb; High Mount Bulb; Exterior Bulbs.
Position: Rear
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: D7TZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2001 Mercury Grand Marquis Submodels:
Base, GS, GSL, Limited Edition, LS, LSE, Ultimate Edition | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
Other Name: Bulb; Turn Signal Light, Rear; Courtesy Light, Front; Brake Light, Rear; Side Marker; Parking Light; Tail Light Bulbs.; Side Marker Bulb; Signal Lamp Bulb; Parking Lamp Bulb; Marker Lamp Bulb; Stop Lamp Bulb; Exterior Bulbs
Position: Front
Replaces: EOSZ-13466-A
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: E3MY-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2001 Mercury Grand Marquis Submodels:
GS, GSL, Limited Edition, LS, LSE, Ultimate Edition | 8 Cyl 4.6 L GAS
2001 Mercury Grand Marquis Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Mercury Grand Marquis Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Mercury Grand Marquis Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Mercury Grand Marquis Headlight Bulb Parts Q&A
Q: How Should a Halogen Headlight Bulb Be Handled and Installed on 2001 Mercury Grand Marquis?
A: A halogen headlamp bulb contains gas under pressure that could shatter when the glass envelope suffers scratches or if the bulb drops to the ground therefore its base should be used for handling rather than touching the glass surface. The removal process for the headlamp bulb should occur right before new replacement because any contaminants entering the lamp can affect performance by settling on the lens and reflector. The headlamps need to stay off as the bulb remains uninstalled. Begin by taking out the headlamp assembly followed by counterclockwise rotation of the headlamp bulb retainer to let it detach. You should hold and remove the bulb from its base. You can install the component by following the reverse steps of removal.