Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2001 Mercury Sable Submodels:
GS, LS, LS Premium | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
| Page 1 of 3 |Next >
1-20 of 46 Results
2001 Mercury Sable Seat Belt
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Mercury Sable Seat Belt available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Mercury Sable Seat Belt as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Mercury Sable Seat Belt Parts Q&A
Q: What Safety Precautions Should Be Taken When Servicing an Undeployed, Scrapped Seat Belt Supplemental Restraint System (SRS) on 2001 Mercury Sable?
A: Safety glasses must be worn at all times when working on undeployed or scrapped vehicles that contain air bag supplemental restraint systems to prevent accidental injuries. The live air bag module should face away from your body when you handle it with either a trim cover or deployment door. Remote deployment should be carried out outdoors with all personnel placed at least 6.1 meters (20 feet) from the site and hearing protection must be used because of the loud deployment sound. Placing the driver or passenger air bag module with trim cover or deployment door facing down will create safety hazards through ricocheting injuries. The first step needs to be the removal of the safety belt pretensioner from inside the vehicle. Detach the electrical connector wires at their end points before getting two 20-gauge wires measuring at least 6.1 meters (20 feet) that you will apply to the stripped transfer points. The pretensioner needs placement on a flat surface within an open outdoor zone where the technician maintains at least 6.1 meters (20 feet) of distance from the pretensioner. When ready to submit the safety belt pretensioner into operation connect its wire terminals to the 12-volt battery terminals. The safety belt pretensioner should cool for at least ten minutes after deployment before human interaction then must be discarded by following standard scrapping methods.