OEM 2002 Ford Crown Victoria Fuel Tank Strap

2002 Ford Crown Victoria Fuel Tank Strap Parts Questions & Experts Answers

• Q: How to Service and Repair Fuel Tank Straps on 2002 Ford Crown Victoria?

  A: Before servicing or repairing the fuel tank straps, the operator must first drain the fuel system pressure because the system remains under pressure after engine shutdown, creating potential hazards for personal safety and property damage. Protection goggles must be worn for all fuel system component operations. A new fuel rack becomes necessary when the support straps, which belong to the fuel rack assembly, suffer damage. The service process begins with removing rear, upper, or lower fuel tank rack assemblies, then proceeding to disconnect the vapor vent box attached to rear or upper assemblies. Secure the connection of fuel/vent lines when possible, then unscrew the securing bolts to open the straps at their hinges and permit access to the fuel tanks. A grease pencil should be used for marking the fuel tank locations on support straps to achieve correct alignment when reinstalling them. The support strap on the lower rack assembly requires removal of its two securing bolts before swinging it upward to expose the fuel tanks. You should remove solenoid valves from the system to make fuel tank removal possible. The installation process involves performing the opposite steps of removal while installing fresh O-ring seals on dismounted fittings by using seals that have yellow identification stripes. The installation completion should be followed by executing the Fuel System Leak Test for confirmation of proper system functionality.