How to service and repair the battery cable on 2002 Ford Escape?

The battery cable servicing requires steps starting with battery tray removal and continuing with air cleaner assembly removal and final removal of the fuse junction box cover. The next step requires cable removal through nut disconnection of both cable pieces and releasing the lock clip before pulling down on the connector. First strip away the bolt found in the inner fender as well as the bolt attached to the ground cable at the transaxle. Unplug all harness clips first from the engine backend then extract the cable clip mounted below the battery support frame. After raising and supporting the vehicle the technician should take off the lower and upper starter solenoid nuts to remove the cable ends. Separately take off both the generator B+ connector nut and its cable end before beginning to remove the battery cable harness assembly. Follow the reverse steps of removal to install the components.

OEM 2002 Ford Escape Battery Cable

Car Battery Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Battery Cables found

View related parts
2002 Ford Escape Battery Cable
Part Number: 2L8Z-14300-AA
Product Specifications
- Other Name: Cable Assembly; Battery Cables; Ground Strap; Negative Cable
- Manufacturer Note: Complete Assy - Includes Positive And Negative Cables, Starter Motor And Relay Cables
- Base No.: 14300
- Item Weight: 2.20 Pounds
- Item Dimensions: 16.6 x 4.5 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L8Z-14300-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Escape Submodels:
- Limited, XLS, XLT | 6 Cyl 3.0 L GAS
View related parts
2002 Ford Escape Battery Cable
Part Number: 2L8Z-14300-CA
Product Specifications
- Other Name: Cable Assembly; Battery Cables; Ground Strap; Negative Cable
- Manufacturer Note: Complete Assy - Includes Positive And Negative Cables, Starter Motor And Relay Cables
- Base No.: 14300
- Item Weight: 3.10 Pounds
- Item Dimensions: 23.4 x 6.0 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L8Z-14300-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS
View related parts
2002 Ford Escape Battery Cable
Part Number: 2L8Z-14300-DA
Product Specifications
- Other Name: Cable Assembly; Battery Cables; Ground Strap; Negative Cable
- Manufacturer Note: Complete Assy - Includes Positive And Negative Cables, Starter Motor And Relay Cables
- Base No.: 14300
- Item Weight: 3.00 Pounds
- Item Dimensions: 23.0 x 5.9 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L8Z-14300-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS
View related parts
2002 Ford Escape Battery Cable
Part Number: 2L8Z-14300-BA
Product Specifications
- Other Name: Cable Assembly; Battery Cables; Ground Strap; Negative Cable
- Manufacturer Note: Complete Assy - Includes Positive And Negative Cables, Starter Motor And Relay Cables
- Base No.: 14300
- Item Weight: 3.00 Pounds
- Item Dimensions: 23.0 x 5.9 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L8Z-14300-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS

2002 Ford Escape Battery Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Escape Battery Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Escape Battery Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford Escape Battery Cable Parts Questions & Experts Answers

Q: How to service and repair the battery cable on 2002 Ford Escape?
A: The battery cable servicing requires steps starting with battery tray removal and continuing with air cleaner assembly removal and final removal of the fuse junction box cover. The next step requires cable removal through nut disconnection of both cable pieces and releasing the lock clip before pulling down on the connector. First strip away the bolt found in the inner fender as well as the bolt attached to the ground cable at the transaxle. Unplug all harness clips first from the engine backend then extract the cable clip mounted below the battery support frame. After raising and supporting the vehicle the technician should take off the lower and upper starter solenoid nuts to remove the cable ends. Separately take off both the generator B+ connector nut and its cable end before beginning to remove the battery cable harness assembly. Follow the reverse steps of removal to install the components.