How to service the front ABS sensor on 2002 Ford Escort?

The task of servicing the front anti-lock brake ABS sensor starts with disconnecting the battery ground cable. The windshield washer pump together with its reservoir require removal to access the right-hand side of the vehicle. Apply the following actions to disconnect the front anti-lock brake sensor electrical connector and expose the foam insulation. The first step to service an anti-lock brake ABS sensor involves removing its wheel and tire assembly by unfastening the four lug nuts. Disassemble the upper sensor cable bracket by removing the bolt then taking out the bracket assembly along with its cable. Insert the sensor cable into position through the created opening after removing the grommet. Before you remove the front anti-lock brake sensor you must first unfasten the clamp bolt along with the clamp of the anti-lock cable and then unscrew the two bolts securing the sensor. Install the equipment by performing the reverse procedures of removal. An abnormally operating drive system could occur when reconnecting and disconnecting a vehicle battery because the vehicle needs to relearn its adaptive strategy through at least 16 km (10 miles) of driving.

OEM 2002 Ford Escort ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 ABS Sensors found

View related parts
2002 Ford Escort ABS Sensor, Driver Side
Part Number: F8CZ-2C190-BB
Product Specifications
- Other Name: Sensor Assembly; Rear Speed Sensor
- Position: Driver Side
- Base No.: 2C190
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.7 x 2.7 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8CZ-2C190-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Escort Submodels:
- Base, LX, SE, Sport, ZX2, ZX2 Cool Coupe, ZX2 Hot Coupe, ZX2 S/R | 4 Cyl 2.0 L GAS
View related parts
2002 Ford Escort ABS Sensor, Passenger Side
Part Number: F8CZ-2C190-AB
Product Specifications
- Other Name: Sensor Assembly; Rear Speed Sensor
- Position: Passenger Side
- Base No.: 2C190
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.7 x 2.6 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8CZ-2C190-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Escort Submodels:
- Base, LX, SE, Sport, ZX2, ZX2 Cool Coupe, ZX2 Hot Coupe, ZX2 S/R | 4 Cyl 2.0 L GAS
View related parts
2002 Ford Escort ABS Sensor, Driver Side
Part Number: F7CZ-2C180-AF
Product Specifications
- Other Name: Sensor Assembly; Front Speed Sensor
- Position: Driver Side
- Base No.: 2C180
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F7CZ-2C180-AF
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Escort Submodels:
- Base, LX, SE, Sport, ZX2, ZX2 Cool Coupe, ZX2 Hot Coupe, ZX2 S/R | 4 Cyl 2.0 L GAS
View related parts
2002 Ford Escort ABS Sensor, Passenger Side
Part Number: F7CZ-2C179-AE
Product Specifications
- Other Name: Sensor Assembly; Front Speed Sensor
- Position: Passenger Side
- Base No.: 2C183
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F7CZ-2C179-AE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Escort Submodels:
- Base, LX, SE, Sport, ZX2, ZX2 Cool Coupe, ZX2 Hot Coupe, ZX2 S/R | 4 Cyl 2.0 L GAS

2002 Ford Escort ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Escort ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Escort ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford Escort ABS Sensor Parts Questions & Experts Answers

Q: How to service the front ABS sensor on 2002 Ford Escort?
A: The task of servicing the front anti-lock brake ABS sensor starts with disconnecting the battery ground cable. The windshield washer pump together with its reservoir require removal to access the right-hand side of the vehicle. Apply the following actions to disconnect the front anti-lock brake sensor electrical connector and expose the foam insulation. The first step to service an anti-lock brake ABS sensor involves removing its wheel and tire assembly by unfastening the four lug nuts. Disassemble the upper sensor cable bracket by removing the bolt then taking out the bracket assembly along with its cable. Insert the sensor cable into position through the created opening after removing the grommet. Before you remove the front anti-lock brake sensor you must first unfasten the clamp bolt along with the clamp of the anti-lock cable and then unscrew the two bolts securing the sensor. Install the equipment by performing the reverse procedures of removal. An abnormally operating drive system could occur when reconnecting and disconnecting a vehicle battery because the vehicle needs to relearn its adaptive strategy through at least 16 km (10 miles) of driving.