How to service the front ABS sensor on 2003 Ford Escort?

Starting the service procedure for the front ABS sensor requires users to disconnect the battery ground cable as the first step. The windshield washer pump along with reservoir must be removed in order to access the right-hand side. The first step is to disconnect the front ABS sensor electrical connector before removing the foam insulation from the area. Start the procedure by unfastening the wheel and tire assembly through the removal of its four lug nuts. Unscrew the bolt to detach the bracket with sensor cable before withdrawing the bracket combined with the cable assembly. The sensor cable must pass through the opening once you remove the grommet before you can begin removing the front ABS sensor through disconnection of the ABS cable clamp bolt followed by clamp removal and unfastening the two sensor securing bolts. The installation process should follow the exact opposite steps used during removal. Accept that the vehicle needs driving a minimum of 16 km (10 mi) after connecting the battery since it adapts to new learning during this time.

OEM 2003 Ford Escort ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 ABS Sensors found

View related parts
2003 Ford Escort ABS Sensor, Driver Side
Part Number: F8CZ-2C190-BB
Product Specifications
- Other Name: Sensor Assembly; Rear Speed Sensor
- Position: Driver Side
- Base No.: 2C190
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.7 x 2.7 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8CZ-2C190-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escort Submodels:
- Base, LX, SE, Sport, ZX2, ZX2 Cool Coupe, ZX2 Hot Coupe, ZX2 S/R | 4 Cyl 2.0 L GAS
View related parts
2003 Ford Escort ABS Sensor, Passenger Side
Part Number: F8CZ-2C190-AB
Product Specifications
- Other Name: Sensor Assembly; Rear Speed Sensor
- Position: Passenger Side
- Base No.: 2C190
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.7 x 2.6 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8CZ-2C190-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escort Submodels:
- Base, LX, SE, Sport, ZX2, ZX2 Cool Coupe, ZX2 Hot Coupe, ZX2 S/R | 4 Cyl 2.0 L GAS
View related parts
2003 Ford Escort ABS Sensor, Driver Side
Part Number: F7CZ-2C180-AF
Product Specifications
- Other Name: Sensor Assembly; Front Speed Sensor
- Position: Driver Side
- Base No.: 2C180
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F7CZ-2C180-AF
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escort Submodels:
- Base, LX, SE, Sport, ZX2, ZX2 Cool Coupe, ZX2 Hot Coupe, ZX2 S/R | 4 Cyl 2.0 L GAS
View related parts
2003 Ford Escort ABS Sensor, Passenger Side
Part Number: F7CZ-2C179-AE
Product Specifications
- Other Name: Sensor Assembly; Front Speed Sensor
- Position: Passenger Side
- Base No.: 2C183
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F7CZ-2C179-AE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escort Submodels:
- Base, LX, SE, Sport, ZX2, ZX2 Cool Coupe, ZX2 Hot Coupe, ZX2 S/R | 4 Cyl 2.0 L GAS

2003 Ford Escort ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Escort ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Escort ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Escort ABS Sensor Parts Questions & Experts Answers

Q: How to service the front ABS sensor on 2003 Ford Escort?
A: Starting the service procedure for the front ABS sensor requires users to disconnect the battery ground cable as the first step. The windshield washer pump along with reservoir must be removed in order to access the right-hand side. The first step is to disconnect the front ABS sensor electrical connector before removing the foam insulation from the area. Start the procedure by unfastening the wheel and tire assembly through the removal of its four lug nuts. Unscrew the bolt to detach the bracket with sensor cable before withdrawing the bracket combined with the cable assembly. The sensor cable must pass through the opening once you remove the grommet before you can begin removing the front ABS sensor through disconnection of the ABS cable clamp bolt followed by clamp removal and unfastening the two sensor securing bolts. The installation process should follow the exact opposite steps used during removal. Accept that the vehicle needs driving a minimum of 16 km (10 mi) after connecting the battery since it adapts to new learning during this time.