How to Service the Rear Shock Absorber and Coil Springs Assembly on 2002 Ford Explorer?

Service of the rear shock absorber with spring assembly starts with taking off the wheel assembly and tire. Proceed to discard the nuts before removing the nut from the stabilizer bar link and throwing away that nut too. Move on to eliminate the nut and bolt before discarding the nut for a second time. Take out the bolt together with the flag nut before removing the shock absorber and spring assembly while discarding both pieces. A proper spring compressor should be used to reduce spring tension on the shock absorber for servicing. Holding the flats of the washer enables you to remove the nut that detaches the shock absorber before discarding it. The washer and bushing and upper mount need removal before extracting the insulator and dust shield from the system. The installation process ends by performing an inverse of the removal steps.

OEM 2002 Ford Explorer Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Coil Springs found

View related parts
2002 Ford Explorer Coil Spring, Rear Part Number: 1L2Z-5560-BA
Product Specifications
- Other Name: Spring - Coil; Coil Spring, Rear; Coil Spring Kit Rear Cargo; Coil Spring Set; Coil Springs; Spring
- Position: Rear
- Base No.: 5560
- Item Weight: 11.90 Pounds
- Item Dimensions: 14.3 x 7.1 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 1L2Z-5560-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, Postal, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2002 Ford Explorer Coil Spring, Front Part Number: 1L2Z-5310-BA
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs; Spring
- Manufacturer Note: Spring code B
- Position: Front
- Base No.: 5310
- Item Weight: 8.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 1L2Z-5310-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Explorer Submodels:
- Eddie Bauer, Limited, Postal, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2002 Ford Explorer Coil Spring, Rear Part Number: 1L2Z-5560-CA
Product Specifications
- Other Name: Spring - Coil; Coil Spring, Rear; Coil Springs; Spring
- Position: Rear
- Base No.: 5560
- Item Weight: 10.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 1L2Z-5560-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, Postal, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2002 Ford Explorer Coil Springs

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Explorer Coil Springs available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Explorer Coil Springs as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford Explorer Coil Springs Parts Q&A

Q: How to Service the Rear Shock Absorber and Coil Springs Assembly on 2002 Ford Explorer?
A: Service of the rear shock absorber with spring assembly starts with taking off the wheel assembly and tire. Proceed to discard the nuts before removing the nut from the stabilizer bar link and throwing away that nut too. Move on to eliminate the nut and bolt before discarding the nut for a second time. Take out the bolt together with the flag nut before removing the shock absorber and spring assembly while discarding both pieces. A proper spring compressor should be used to reduce spring tension on the shock absorber for servicing. Holding the flats of the washer enables you to remove the nut that detaches the shock absorber before discarding it. The washer and bushing and upper mount need removal before extracting the insulator and dust shield from the system. The installation process ends by performing an inverse of the removal steps.