My Garage
Cart

OEM 2002 Ford F-250 Super Duty HVAC Control Module

Heater Control Assembly
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 HVAC Control Module found

  • 2002 Ford F-250 Super Duty HVAC Control Module Diagram - F81Z-19980-AA
    View related parts

    2002 Ford F-250 Super Duty Temperature Control Part Number: F81Z-19980-AA

    $61.94 MSRP: $98.36
    You Save: $36.42 (38%)
    Product Specifications
    • Other Name: Control; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit
    • Base No.: 19980
    • Item Weight: 6.20 Pounds
    • Item Dimensions: 4.5 x 2.9 x 10.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: F81Z-19980-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2002 Ford F-250 Super Duty Submodels:
    • Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

2002 Ford F-250 Super Duty HVAC Control Module

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford F-250 Super Duty HVAC Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford F-250 Super Duty HVAC Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford F-250 Super Duty HVAC Control Module Parts Q&A

  • Q: How to service the HVAC control module on 2002 Ford F-250 Super Duty?
    A: Service of the HVAC control module requires disconnecting the A/C cycling switch electrical connector across all vehicle models as the first step. The auxiliary heater lines must first be moved aside before removal of the bolt on vehicles with auxiliary A/C function. First remove the screws and slightly set aside the suction accumulator for all vehicles then remove additional screws. Disconnect and remove the blower motor speed control by disconnecting its electrical connector. The installation process ends with the opposite actions of removal steps.