Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
Manufacturer Note: Front stabilizer, DRW , twin I,beam , Wide Frame WB (Raised over Axle), 24mm dia bar , Yellow ID
Position: Front
Base No.: 5482
Item Weight: 13.50 Pounds
Item Dimensions: 10.2 x 4.0 x 32.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: F81Z-5482-BA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2002 Ford F-250 Super Duty Submodels:
Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
2002 Ford F-250 Super Duty Sway Bar Kit
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford F-250 Super Duty Sway Bar Kit available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford F-250 Super Duty Sway Bar Kit as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Ford F-250 Super Duty Sway Bar Kit Parts Questions & Experts Answers
Q: How to service and repair the Sway Bar Link and Sway Bar Kit on Super Duty F-250 and F-350 on 2002 Ford F-250 Super Duty?
A: Service or repair of Super Duty F-250 and F-350 sway bar links requires that you first raise and support the vehicle. Begin the procedure by removing nuts and washers from the sway bar links' both lower ends before disconnecting the links. Then take out the nuts accompanying washers from both upper link connection points to the frame then remove the links. The procedure requires disconnection of Sway Bar Kit retainers by removing Sway Bar Kit retainer-to-axle bracket nuts and subsequent removal of Sway Bar Kit retainers plus Sway Bar Kit mounting brackets alongside U-bolts and Sway Bar Kit. The installation requires brand new fasteners while you should follow the removal steps in reverse order to retain component stability using specified torque values because suspension fasteners are crucial for system performance. Install new components using either the original part number or equivalents so you prevent using substandard quality or substitute designs.